Monday, May 18, 2020
Deposits in thermal power plant condensers - Free Essay Example
Sample details Pages: 16 Words: 4778 Downloads: 5 Date added: 2017/06/26 Category Statistics Essay Did you like this example? Abstract: Unexpected fouling in condensers has always been one of the main operational concerns in thermal power plants. This paper describes an approach to predict fouling deposits in thermal power plant Donââ¬â¢t waste time! Our writers will create an original "Deposits in thermal power plant condensers" essay for you Create order condensers by means of support vector machines (SVMs). The periodic fouling formation process and residual fouling phenomenon are analyzed. To improve the generalization performance of SVMs, an improved differential evolution algorithm is introduced to optimize the SVMs parameters. The prediction model based on optimized SVMs is used in a case study of 300MW thermal power station. The experiment result shows that the proposed approach has more accurate prediction results and better dynamic self-adaptive ability to the condenser operating conditions change than asymptotic model and T-S fuzzy model. Keywords: Fouling prediction; Condensers; Support vector machines; Differential evolution 1. Introduction Condenser is one of key equipments in thermal power plant thermodynamic cycle, and its thermal performance directly impacts the economic and safe operation of the overall plant [1]. Fouling of steam condenser tubes is one of the most important factors affecting their thermal performance, which reduces effectiveness and heat transfer capability with time [2, 3]. It is found that the maximum decrease in effectiveness due to fouling is about 55 and 78% for the evaporative coolers and condensers, respectively [2]. As a consequence, the formation of fouling in condenser of thermal power plants has special economic significance [4-6]. Furthermore, it represents the concerns of modem society in respect of conservation of limited resources, for the environment and the natural world, and for the improvement of industrial working conditions [6, 7]. The fouling of heat exchangers is a wide ranging topic coveting many aspects of technology, the designing and operating of condenser must contemplate and estimate the fouling resistance to the heat transfer. The knowledge of the progression and mechanisms of formation of fouling will allow a design of * Manuscript an appropriate fouling mitigation strategy such as optimal cleaning schedule to be made. The most common used models for fouling estimation are the thermal resistance method and heat transfer coefficient method [6-10]. However, the residual fouling of periodic fouling deposition process and the dynamic changes of heat exchanger operating condition are not considered in these models. Consequently, the estimation error of those methods is very large. Artificial Neural Networks (ANNs) are capable of efficiently dealing with many industrial problems that cannot be handled with the same accuracy by other techniques. To eliminate most of the difficulties of traditional methods, ANNs are used to estimate and control the fouling of heat exchanger in recent years. Prieto et al [11] presented a model that uses non-fully connected feedforward artificial neural networks for the forecasting of a seawater-refrigerated power plant condenser performance. Radhakrishnan et al [12] developed a neural network based fouling model using historical plant operating data. Teruela et al [13] described a systematic approach to predict ash deposits in coal-fired boilers by means of artificial neural networks. To minimize the boiler energy and efficiency losses, Romeo and Gareta illustrated a hybrid system that combines neural networks and fuzzy logic expert systems to control boiler fouling and optimize boiler performance in [14]. Fan and Wang proposed diagonal recurrent neural network [15] and multiple RBF neural network [16] based models for measuring fouling in thermal power plant condenser. Although the technique of ANNs is able to estimate the fouling evolution of heat exchanger with satisfaction, there are some problems. The selection of structures and types of ANNs dependents on experience greatly, and the training of ANNs are based on empirical risk minimization (ERM) principle [18], which aims at minimizing the training errors. ANNs therefore face some disadvantages such as over-fitting, local optimal and bad generalization ability. Support vector machines (SVMs) are a new machine learning method deriving from statistical learning theory [18, 19]. Since later 1990s, SVMs are becoming more and more popular and have been successfully applied to many areas such as handwritten digit recognition, speaker identification, function approximation, chaotic time series forecasting, nonlinear control and so on [20-24]. Established on the theory of structural risk minimization (SRM) [19] principle, compared with ANNs, SVMs have some distinct advantages such as globally optimal, small sample-size, good generalization ability and resistant to the over-fitting problem [18-20]. In this paper, the use of SVMs model is developed for the predicting of a thermal power plant condenser. The prediction model was used in a case study of 300MW thermal power station. The experiment result shows that the prediction model based on SVMs is more precise than thermal resistance model and other methods, such as T-S fuzzy model [17]. Moreover, to improve the generalization performance of SVMs, an improved differential evolution algorithm is introduced to optimize the parameters of SVMs. 2. Periodic fouling process in condenser The accumulation of unwanted deposits on the surfaces of heat exchangers is usually referred to as fouling. In thermal power station condensers, fouling is mainly formed inside the condenser tubes, reducing heat transfer between the hot fluid (steam that condenses in the external surface of the tubes) and the cold water flowing through the tubes. The presence of the fouling represents a resistance to the transfer of heat and therefore reduces the efficiency of the condenser. In order to maintain or restore efficiency it is often necessary to clean condensers. The Taprogge system has found wide application in the power industry for the maintenance of condenser efficiency, which is one of on-line cleaning systems [6]. When the fouling accumulation in condensers reached a threshold, the sponge rubber balls cleaning system is activated, slightly oversized sponge rubber balls continuously passed through the tubes of the condenser by the water flow, and the fouling in the condenser is reduced or eliminated. The progresses of fouling accumulating and cleaning continue alternatively with time. Therefore, the fouling evolution in power plant condensers is periodic. However, the sponge rubber ball system is only effective of preventing the accumulation of waterborne mud, biofilm formation, scale and corrosion product deposition [6]. As for some of inorganic materials strongly attached on the inside surface of tubes, e.g. calcium and magnesium salts, can not be effectively reduced by this technique. As a result, at the end of every sponge rubber ball cleaning period, there still exist a lot of residual fouling in the condensers, and the residual fouling will be accumulated continuously with the time. Where, the fouling can be cleaned by the Taprogge system is called soft fouling, and those can not be cleaned residual fouling is called hard fouling. When the residual fouling accumulated to some degree, the cleaning techniques that can eliminate them, such as chemistry cleaning method, should be used. Generally, the foul degree of heat exchanger is expressed as fouling thermal resistance, defined as the difference between rates of deposition and removal [6]. In this paper, the corresponding fouling thermal resistance of soft fouling and hard fouling expressed as Rfs and Rfh, respectively. Then, the condenser fouling thermal resistance Rf in any time is the sum of soft fouling thermal resistance and hard fouling thermal resistance, expressed as Eq. (1). ( ) ( ) ( ) ( ) ( ) ( ) 0 0 0 R t R t R t R t R t t R t t f fs fh f fs fh ? ? ? ? ? ? ? (1) where ( ) 0 R t f is the initial fouling. Fig. 1 periodic fouling evolution in power plant condensers Fig. 1 demonstrates the periodic evolution process of fouling in power plant condensers. In fact, the evolution process of fouling in a condenser is very complex, which is related to a great number of variables, such as condenser pressure, cooling water hardness, the velocity of the circulating water and the corresponding inlet and outlet temperatures, the non-condensing gases present in the condenser, and so on. The Rfs(t) and Rfh(t) expressed a very complex physical and chemical process, their accurate mathematic models are very hard to be obtained. Hence, measurement and prediction of fouling development is a very difficult task. Since the fouling evolution process is a very complex nonlinear dynamic system, the traditional techniques based on mathematic analysis, i.e. asymptotic fouling model, are not efficient to describe it [11]. SVMs, as a small sample method to deal with the highly nonlinear classification and regression problems based on statistic learning theory, is expected to be able to reproduce the nonlinear behavior of the system. 3. SVMs regression and parameters 3.1 SVMs regression SVMs are a group of supervised learning methods that can be applied to classification or regression. SVMs represent an extension to nonlinear models of the generalized portrait algorithm developed by Vladimir Vapnik [18]. The SVMs algorithm is based on the statistical learning theory and the Vapnik-Chervonenkis (VC) dimension introduced by Vladimir Vapnik and Alexey Chervonenkis [19]. Here, the SVMs regression is applied to forecast the fouling in power plant condensers. Let the given training data sets represented as ?( , ), ( , ), , ( , )? 1 1 2 2 n n D ? x y x y ? ? ? x y , where d i x ? R is an input vector, y R i ? is its corresponding desired output, and n is the number of training data. In SVMs, the original input space is mapped into a high dimensional space called feature space by a nonlinear mapping x ? g(x) . Let f (x) be the SVM outputs corresponding to input vector x. In the feature space, a linear function is constructed: f (x) ? wT g(x) ? b (2) where w is a coefficient vector, b is a threshold. The learning of SVMs can be obtained by minimization of the empirical risk on the training data. Where, ? -intensive loss function is used to minimize the empirical risk. The loss function is defined as L? (x, y, f ) ? y ? f (x) ? max(0, y ? f (x) ) e (3) where ? is a positive parameter to allow approximation errors smaller than ? , the empirical risk is ? n i emp i i L x y f n R w 1 ( , , ) 1 ( ) ? (4) Besides using ? -intensive loss, SVMs tries to reduce model complexity by minimizing 2 w , which can be described by slack variables. Introduce variables i ? and i , then SVMs regression is obtained as the following optimization problem: min ? ? ? ? n i i i w C 1 2 ( ? ) 2 1 ? ? (5) s.t. i i i y ? f (x ) ? ? , i i i f (x ) ? y ? ? , i ? , i ? 0 where C is a positive constant to be regulated. By using the Lagrange multiplier method [18], the minimization of (5) becomes the problem of maximizing the following dual optimization problem max ( ? )( ? ) ( , ) 2 1 ( ? ) ( ? ) 1 1 , 1 j j i j n i j i i n i i i i i n i i ? y ? ? ? ? ? ? ? ? ? K x x ? ? ? (6) s.t. ( ? ) 0 1 ? ? ? ? n i i i ? ? ,C = i , i ? =0 where i and i ? are Lagrange multipliers, and kernel ( , ) i j K x x is a symmetric function which is equivalent to the dot product in the feature space. The kernel ( , ) i j K x x is defined as the following. ( , ) ( ) ( ) j T i j i K x x ? g x g x (7) There are some kernels, i.e. polynomial kernel K(x, y) ? (x ? y ? 1) d and hyperbolic tangent kernel ( , ) tanh( ( ) ) 1 2 K x y ? c x ? y ? c can be used. Where the Gaussian function is used as the kernel. ) 2 ( , ) exp( 2 2 ? x y K x y ? ? ? (8) Replacing i i i ? ? ? ? ? ? and relation 0 ? ? ? ? i , then the optimization of (6) is rewritten as max ( , ) 2 1 1 1 , 1 j i j n i j i n i i i n i i ? y ? ? ? ? ? K X X ? ? ? ? ? (9) s.t. 0 1 ? ? ? n i i ? ,C ? i ? ? ? C The learning results for training data set D can be derived from equation (9). Note that only some of coefficients i ? are not zeros and the corresponding vectors x are called support vectors (SV). That is, only those vectors whose corresponding coefficients i i are not zero are SV. Then the regression function is expressed as equation (10). f x K x x b i j p i i i ? ? ? ( ) ( ? ) ( , ) 1 ? ? (10) It should be noted that p is the numbers of SV, and the constant b is expressed as ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? p i i i i i p i i i i i b y K x x y K x x 1 1 min ( ? ) ( , ) max ( ? ) ( , ) 2 1 ? ? ? ? (11) 3.2 SVM parameters The quality of SVMs models strongly depends on a proper setting of parameters and SVMs approximation performance is sensitive to parameters [25, 26]. Parameters to be regulated include hyper-parameters C, ? and kernel parameter? , if the Gaussian kernel is used [25]. The values of C, ? and ? are relate to the actual object model and there are not fixed for different data set. So the problem of parameter selection is complicated. The values of parameter C, ? and ? affect model complexity in a different way. The parameter C determines the trade-off between model complexity and the tolerance degree of deviations larger than ? . The parameter? controls the width of the ? -insensitive zone and can affect the numbers of SV in optimization problem. The kernel parameter? determines the kernel width and relates to the input range of the training data set. Here, parameters selection is regarded as compound optimization problem and an improved differential evolution algorithm is proposed to select suitable parameters value. 4. Improved Differential Evolution Differential evolution (DE) algorithm is a simple but powerful population-based stochastic search technique for solving global optimization problems [27]. DE has three operations: mutation, crossover and selection. The crucial idea behind DE is a scheme for generating trial vectors. Mutation and crossover are used to generate trial vectors, and selection then determines which of the vectors will survive into the next generation. The original DE algorithm is described in the following briefly. 4.1 Basic differential evolution Let S ? Rn be the search space of the problem under consideration. Then, the DE algorithm utilizes NP, n-dimensional vectors X x x xt S i NP in t i t i t i ( , , , ) , 1,2, , 1 2 ? ? ? ? ? as a population for each generation of the algorithm. t denotes one generation. The initial population is generated randomly and should cover the whole parameter space. In each population, two operators, namely mutation and crossover, are applied on each individual to yield a trial vector for each target vector. Then, a selection phase takes place to determine the trial vector enters the population of the next generation or not. For each target individual t i X , a mutant vector { 1 , , 1} 1 ?1 ? ? t ? n t t i V v ? v is determined by the following equation. ( ) 1 2 3 1 t r t r t r t i V ? ? X ? F ? X ? X (12) Where F ? 0 is a real parameter, called mutation constant, which controls the amplification of the difference vector ( ) 2 3 t r t r X ? X to avoid search stagnation. According to Storn and Price [27], the F is set in (0, 2]. 1 r , 2 r , 3 r are indexes, randomly selected from the set {1,2,, NP} . Note that indexes must be different from each other and from the running index i so that NP must be a least four. Following the mutation phase, the crossover (recombination) operator is applied on the population. For each mutant vector t ?1 i V , a trial vector { 1 , , 1} 1 ?1 ? ? t ? n t t i U u ? u is generated, using the following scheme. ? ? ? ? ? ? ? ? , ( ) ( ) 1 , ( ) ( ) 1 x rand j CR and j randn i v rand j CR or j randn i u t ij t t ij ij (13) Where j=1, 2, ?, n. rand( j) is the jth evaluation of a uniform random number generator within [0, 1]. CR is a crossover probability constant in the range [0, 1], which has to be determined previously by the user. randn(i) ? (1,2,,n) is a randomly chosen index which ensures that t ?1 i U gets at least one element from t ?1 i V . Otherwise, no new parent vector would be produced and the population would not alter. To decide whether the trial vector t ?1 i U should be a member of the population comprising the next generation, it is compared to the corresponding target vector t i X , and the greedy selection strategy is adopted in DE. The selection operator is as following. ? ? ? ? ? ? , otherwise 1 , ( 1 ) ( ) 1 t i t i t i t t i i X U f U f X X . (14) 4.2 Modification of Mutation From the mutation Eq. (12) we can see that in the original DE three vectors are chosen at random for mutation and the base vector is then chosen at random within the three, which has an exploratory effect but it slows down the convergence of DE. In order to accelerate the convergence speed, a modified mutation scheme is adopted. The randomly selected three vectors for mutation are sorted by ascending in terms of the fitness function value. The tournament best vector is t tb x , the better vector is t tm x and the worst vector is t tw x . For speeding up convergence, the base vector in the mutation equation should select t tb x , and the direction of difference vector should direct to t tm x , that is to choose ( t ) tw t tm x ? x as the difference vector. Then the new modified mutation strategy is as following Eq. (15). 1 ( t ) tw t tm t tb t i v ? ? x ? F ? x ? x . (15) After such modification, this process explores the region around each t tb x in the direction of ( t ) tw t tm x ? x for each mutated point. The mutation operator is not random search any more, but a determinate search. However, the vectors for mutation are selected randomly in the population space, so in the whole evolutionary process it is still a random search, which can ensure the global optimization performance of the algorithm [28]. 5 Optimization procedures of IDE for SVMs 5.1 Objective function The objective of SVMs parameters optimization is to minimize deviations between the outputs of training data and the outputs of SVMs. Where, the mean square error (MSE) is used as the performance criterion. 2 1 1 ( ( , ))2 1 ? ? ? ? ? ? ? ? K k k k y f x w K Obj (16) Where K is the number of training data, k y is the output of the kth training data, and f (x ,w) k is the output of SVMs correspond to input k x . Then the objective of the IDE is to search optimal parameter C, ? and ? to minimize Obj: min F(C,? ,? ) ? minObj (17) Generally, the search range of these parameters is C? [1, 1000], ? ? (0, 1], ? ? (0, 0.5]. For special problem, the search range is changeable. 5.2 Optimization procedures The searching procedures of the improved differential evolution (IDE) for optimization of SVMs parameters are shown as below. Step1: Input the training data and test data, select the Gaussian kernel function. Step2: Specify the number of population NP, the difference vector scale factor F, the crossover probability constant CR, and the maximum number of generations T. Initialize randomly the individuals, i.e. C, ? and ? , of the population and the trial vector in the given searching space. Set the current generation t=0. Step3: Use each individual as the control parameters of SVMs, train the SVMs using training data. Step4: Calculate the fitness value of each individual in the population using the objective function given by equation (17). Step5: Compare each individual?s fitness value and get the best fitness and best individual. Step6: Generate a mutant vector according to equation (15) for each individual. Step7: According to equation (13), do the crossover operation and yield a trial vector. Step8: Execute the selection operation in terms of equation (14) and generate a new population. Step9: t=t+1, return to Step3 until to the maximum number of generations. 6 Case study 6.1 Fouling prediction scheme The formation and development of fouling in condensers is influenced not only by cooling water hardness and turbidity but also by working conditions of condensers, such as velocity of the cooling water and the corresponding inlet and outlet temperatures, the saturation temperature of steam under entrance pressure of condenser, the non-condensing gases present in the condenser, and so on. According to the previous analysis of periodic fouling process of power plant condensers, the fouling can be classified as soft fouling and hard fouling. Therefore, two SVMs models are developed to forecast thermal resistance of soft and hard fouling, respectively. Then, the whole prediction fouling thermal resistance ( f R? ) in condenser is the sum of output of soft fouling prediction model ( fs R? ) and output of hard fouling prediction model ( fh R? ). Generally, the evolution of soft fouling is determined by the velocity (v), turbidity (d), inlet (Ti) and outlet temperatures (To) of cooling water, saturation temperature of steam under entrance pressure of condenser (Ts), and prediction time range (Tp) (the running time in a sponge rubber ball cleaning period). Therefore, these variables are chosen as inputs of the soft fouling thermal resistance predictive model. As for hard fouling of the class of calcium and magnesium salts, it is related to the residual fouling at the beginning and the end of previous sponge rubber ball cleaning period (corresponding thermal resistance is Rfb,n-1, Rfe,n-1, respectively), hardness of cooling water (s), saturation temperature of steam under entrance pressure of condenser (Ts), and the accumulating running time of condenser (Ta). Hence, those variables are chosen as the inputs of hard fouling thermal resistance prediction model. The soft and hard fouling prediction model based on SVMs illustrated in Fig. 2 and Fig. 3, respectively. ( , ) 1 K x x ( , ) 2 K x x ( , ) p?1 K x x ( , ) p K x x 1 1 2 2 1 1 ? ? ? ? p p ? ? p p ( , ) 1 K x x ( , ) 2 K x x ( , ) p?1 K x x ( , ) p K x x S b Ts 1 1 2 2 1 1 ? ? ? ? p p ? ? p p Ta Rfh Rfb,n-1 R fe,n-1 ? ^ Fig. 2 Soft fouling prediction model Fig. 3 Hard fouling prediction model The parameters of the two prediction models are optimized by the IDE algorithm. Fig. 4 illustrates the fouling prediction model using SVMs optimized by IDE. ? Fig. 4 fouling prediction model based on SVMs optimized by IDE 6.2 Experiment results In this section, experiments on N-3500-2 condenser (300MW) in Xiangtan thermal power plant are carried out to prove the effectiveness of the proposed approach. The cooling water of this plant is river water that pumped from the Xiangjiang river. The Taprogge systems are installed in the plant to on-line clean the condensers. At present, the condenser is cleaned every two days using the Taprogge system, and every cleaning time is about 6 hours. Obviously, the fitted cleaning period is not optimal, because the fouling accumulating process is dynamic changing with the operating conditions changing. The experiment system consists of sensors for operating condition parameters measuring, data acquisition system, PC-type computer, etc. A set of 1362 real-time running data in different operating conditions in 84 cleaning periods is collected to train and optimize the SVMs model for fouling prediction, another set of 300 data is chosen for model verification. The proposed IDE is used to optimize the SVMs parameters. The control parameters of IDE are the following. The number of population is 30, the crossover probability constant CR is 0.5, the mutation factor F is 0.5, and the maximum number of generations is 100. The selection of above parameters is based on the literature [27] and [28]. After application of IDE, the optimal SVMs parameters of soft fouling prediction model are C=848, ? =0.513, ? =0.0117, the optimal SVMs parameters of hard fouling prediction model are C=509, ? =0.732, ? =0.0075. The velocity, turbidity, and inlet temperature of cooling water is different in summer and winter, the evolution of fouling in condensers is also different in the two seasons. In the experiments, four sponge rubber ball cleaning periods in different seasons are investigated. Among them, three periods, i.e. the first, 18th and 40th period, are in summer, and the other period is in winter. The hardness and turbidity of cooling water is 56mg/L and 17mg/L in summer, and is 56mg/L and 29mg/L in winter. To demonstrate the effectiveness of the proposed approach, the comparison between the SVMs model, T-S fuzzy logic model [17] and asymptotic model is considered. The asymptotic model is obtained by probability analysis method, and the corresponding expression is the following [17]. ( ) ? 41.3?[1? ?(t ?1.204) /14.57 ] f R t e (17) Table 1 and Table 2 show the fouling thermal resistance prediction results of the above three models in the first and the 18th cleaning periods, respectively. From the Table 1 and Table 2, we can see that compared with tradition asymptotic model and T-S fuzzy logic model, the SVMs based prediction model has higher prediction precision. Fig. 5 and Fig. 6 show the predicted fouling thermal resistance evolution based on the optimized SVMs model and asymptotic model. Fig.6 clearly shows that the asymptotic model is not able to forecast the fouling evolution process at the beginning stage of the 18th cleaning period, the reason is that the residual fouling in the periodic fouling formation process is not considered in the asymptotic models. Table 1 fouling thermal resistance prediction results in the first cleaning period Running time Tpa (hour) Operating conditions Measuring values Rf (K.m2/kW) Prediction values (K.m2/kW) Relative error v(m/s) Ti(?) Ts(?) SVMs model T-S model Asymptotic model SVMs model T-S model Asymptotic model 0 2.0 19.1 33.2 0.0258 0.0260 0.0258 0.62 0 5 2.0 18.5 33.3 0.0995 0.0992 0.1018 0.0947 0.26 2.31 4.82 10 2.0 15.6 31.9 0.2028 0.2037 0.2007 0.1872 0.45 1.04 7.69 15 2.0 14.3 31.6 0.2501 0.2494 0.2411 0.2528 0.27 3.6 1.08 20 2.0 15.5 33.5 0.2865 0.2864 0.2830 0.2993 0.03 1.22 4.48 25 2.0 15.5 34.0 0.3174 0.3172 0.3123 0.3323 0.06 1.61 4.69 30 2.0 16.1 34.8 0.3420 0.3393 0.3321 0.3558 0.79 2.89 4.04 35 2.0 14.4 34.6 0.3567 0.3562 0.3497 0.3724 0.14 1.96 4.40 40 2.0 14.2 34.9 0.3722 0.3736 0.3600 0.3842 0.37 3.28 3.22 Table 2 fouling thermal resistance prediction results of the 18th cleaning period Running time Ta (hour) Operating conditions Measuring values Rf (K.m2/kW) Prediction values (K.m2/kW) Relative error v(m/s) Ti(?) Ts(?) SVMs model T-S model Asymptotic model SVMs model T-S model Asymptotic model 632 2.0 14.0 29.8 0.0774 0.0791 0.074 2.26 0 637 2.0 14.2 30.9 0.1772 0.1773 0.1850 0.0947 0.06 4.40 46.56 642 2.0 12.5 30.4 0.2474 0.2479 0.2438 0.1872 0.21 1.46 24.33 647 2.0 11.9 30.4 0.2898 0.2908 0.2955 0.2528 0.36 1.97 12.77 652 2.0 10.6 30.1 0.3230 0.3222 0.3354 0.2993 0.25 3.84 7.34 657 2.0 11.4 31.5 0.3447 0.3437 0.3525 0.3323 0.28 2.26 3.60 662 2.0 10.2 31.2 0.3655 0.3652 0.3648 0.3558 0.08 0.19 2.65 667 2.0 10.7 32.0 0.3831 0.3815 0.3767 0.3724 0.42 1.67 2.79 672 2.0 11.8 33.5 0.3985 0.3978 0.3912 0.3842 0.18 1.83 3.59 To eliminate the influence of residual fouling and improve the prediction precision, an improved asymptotic models are introduced in [17] according to the probability analysis method. The improved asymptotic model of the 40th cleaning period is the following [17]. ( ) ? 41.3?[1? ?(t ?4.31) /14.57 ] f R t e (18) Fig. 5 predicted fouling thermal resistance evolution Fig. 6 predicted fouling thermal resistance evolution in the first cleaning period in the 18th cleaning period At the 27th hour of the cleaning period, the velocity of cooling water increased from 2.0m/s to 2.5m/s to adapt the steam load change, and the experiment result shows in Table 3. From the Table 3, we can see that from 0 to the 27th hour in this cleaning period, the improved asymptotic model is able to well forecast the fouling evolution. At the time of 27th hour, the velocity of cooling water increased suddenly, and the fouling thermal resistance will slowly increase after decreasing a period of time. However, the improved asymptotic model is not able to forecast the tendency. The models of SVMs and T-S fuzzy logic are able to predict the tendency, but the SVMs model has more accurate results than T-S model. Fig. 7 demonstrates the predicted fouling thermal resistance evolution based on the optimized SVMs model and the improved asymptotic model. Table 3 fouling thermal resistance prediction results of the 40th cleaning period Running time Ta (hour) Operating conditions Measuring values Rf (K.m2/kW) Prediction values (K.m2/kW) Relative error v(m/s) Ti(?) Ts(?) SVMs model T-S model Asymptotic model SVMs model T-S model Asymptotic model 1289 2.0 10.5 28.4 0.1065 0.1070 0.1066 0.1058 0.47 0.01 0.66 1294 2.0 10.1 28.6 0.2031 0.2011 0.2026 0.1950 0.98 0.25 3.99 1299 2.0 10.8 30.1 0.2660 0.2676 0.2574 0.2583 0.60 3.23 2.89 1304 2.0 12.0 32.0 0.3130 0.3161 0.3053 0.3032 0.99 2.46 3.13 1309 2.0 12.5 32.9 0.3422 0.3408 0.3398 0.3351 0.41 0.70 2.07 1314 2.5 11.1 32.3 0.3672 0.3687 0.3625 0.3578 0.41 1.28 2.56 1316 2.5 10.1 32.0 0.3734 0.3728 0.3712 0.3648 0.16 0.59 2.30 1319 2.5 10.0 32.2 0.3173 0.3152 0.3327 0.3738 0.66 4.85 17.81 1324 2.5 11.7 33.5 0.3048 0.3054 0.3135 0.3852 0.20 2.85 26.38 1329 2.5 13.2 34.8 0.3079 0.3097 0.3202 0.3933 0.58 3.99 27.73 Fig. 7 predicted fouling thermal resistance evolution Fig. 8 predicted fouling thermal resistance evolution in the 40th cleaning period in the 85th cleaning period The 85th cleaning period in winter is also considered in the experiment to further evaluate the effectiveness of the proposed approach. Table 4 shows the fouling thermal resistance prediction results of this period. From the Table 4 we can observe that the prediction model based on the optimized SVMs has more satisfactory results than the improved asymptotic model and T-S model. Fig. 8 demonstrates the predicted fouling thermal resistance evolution based on the optimized SVMs model and the improved asymptotic model. Table 4 fouling thermal resistance prediction results of the 85th cleaning period Running time Ta (hour) Operating conditions Measuring values Rf (K.m2/kW) Prediction values (K.m2/kW) Relative error v(m/s) Ti(?) Ts(?) SVMs model T-S model Asymptotic model SVMs model T-S model Asymptotic model 2830 2.0 2.5 24.9 0.1594 0.1698 0.1632 0.1058 0.99 2.38 33.63 2835 2.0 2.6 25.4 0.2467 0.2541 0.2345 0.1950 0.64 4.95 20.96 2840 2.0 2.8 26.3 0.3055 0.3065 0.2827 0.2583 0.01 7.46 15.45 2845 2.0 2.6 27.1 0.3410 0.3414 0.3177 0.3032 0.12 6.83 11.09 2850 2.0 2.5 27.7 0.3696 0.3702 0.3548 0.3351 0.17 4.01 9.33 2855 2.5 2.4 28.1 0.3891 0.3932 0.3776 0.3578 1.05 2.96 8.04 2860 2.5 2.4 29.2 0.4005 0.4003 0.3883 0.3648 0.05 3.05 8.92 2865 2.5 2.6 29.6 0.4087 0.4075 0.3979 0.3738 0.28 2.64 8.54 2870 2.5 2.7 29.4 0.4138 0.4132 0.4062 0.3852 0.14 1.84 6.91 7 Conclusions The fouling accumulating process in condensers is very complex, which is influenced by a lot of operating conditions. Hence, fouling prediction is a very difficult task, and the traditional techniques, such as asymptotic fouling model and heat transfer coefficient method, are not efficient to describe it. In this paper, the condenser fouling forecasting model based on SVMs was proposed. The parameters of the SVMs model were optimized by an improved differential evolution. Practice application experiment results show that, compared with traditional asymptotic model, the forecasting model based on optimized SVMs is able to effectively eliminate the influence of residual fouling to forecasting accuracy, has good dynamic self-adaptive ability and can obtain satisfactory forecasting accuracy when the condenser operating conditions varied in a large range. The proposed approach is also compared with the T-S fuzzy logic model, experiment results in four different cleaning periods present that the optimized SVMs model has higher forecasting accuracy than T-S model. The relevance of these results shows that the technique of support vector machines is able to estimate well the evolution of the fouling in thermal power plant condensers without being much affected by the operating conditions change and periodic residual fouling, and the general principles of application of SVMs developed here would be useful in other problems of fouling. Acknowledgement: This work was partly supported by the National High Technology Research and Development Program of China (Grant no. 2008AA04Z214, 2007AA04Z244), the State Key Program of National Natural Science Foundation of China (Grant no. 60835004, 60775047), the Scientific Research Fund of Hunan Provincial Education Department (08C337), and the Program for New Century Excellent Talents in University. References:
Friday, May 15, 2020
Nursing Terminology System Vs. The International...
Nursing Terminology System Comparison Nursing terminology could be described as the formal and informal communication that occurs in a nurses daily activity. According to McGonigle Mastrian (2009) nursing terminology allows nurses to communicate nursing data, information and knowledge specific to nursing. In addition, standardized nursing terminology refers to a system. This means they have undergone approval by a specific authority. The American Nurses Association (ANA) is one authority with a standardized nursing practice and information infrastructure committee, which recognizes twelve standardized terminologies, both nursing specific and interdisciplinary (p. 98). The Clinical Care Classification system and the Internationalâ⬠¦show more contentâ⬠¦The CCC systemââ¬â¢s major developer is Dr. Virginia K. Saba. Dr. Saba has pioneered the integration of computer technology and nursing. The ICNP was developed by the International Council of Nurses (ICN) to cover diagnoses, nursing actions and nursing outcomes a s it relates to nursing phenomenon (p. 99). The CCC website (2012) describes this system of nursing terminology as a ââ¬Å"unique coding structure for assessing, documenting, and classifying patient care by nurses and other clinical professionals in any health care settingâ⬠(www.sabacare.com). The CCC system serves nursing as well as other health care providers such as physical, occupational and speech therapists and medical social workers. The ICN website (2015) reports ICNP was created to improve worldwide healthcare as an integral part of the global information infrastructure to influence health care practice and policy. This database is intended for use by nurses, who can describe and report in detail, nursing assessments and interventions, as opposed to being a system for other clinical healthcare professionals. The ICNP is reported reliable to support care and effective decision making and useful for nursing education, research and health policy (www.icn.ch/what-we-do/about-icnpr/). The CCC website (2012) states there are a total of 176 nursing diagnoses and 804 concepts and core interventions to make up the nursing interventions and actions. There are a total of 21 care components representing functional,
Wednesday, May 6, 2020
Why Effective Communication Is Important Developing...
Unit 3. Assessment Criteria 3.1.1. Explain why effective communication is important in developing positive relationships with children, young people and adults. Effective communication is important when developing positive relationships with anyone, as it builds trust and establishes rapport between the people who are communicating with one another. Respect is an important element in effective communication, and the development of a relationship. Actively listening to another personââ¬â¢s point of view or opinion, remembering personal details, showing an interest and responding in an appropriate manner, all show that you have listened and placed importance upon what has been said, which leads to positive relationships and respectful, effective communication. Effective communication, and respectful relationships are vital when talking with children, young people, and adults as they both allow accurate gathering of information and feelings and the subsequent passing along of any issues that may need to be followed up on. Both effective communication and positive relationships require effort, consideration and respect from all parties involved in order to continue to be effective and productive. Assessment Criteria 3.1.2. Explain the principles of relationship building with children, young people and adults. Respect of and understanding that other people have differing opinions, views and religious/cultural beliefs, and how these beliefs may impact on building an effective,Show MoreRelatedWhy Effective Communication Is Important? Developing Positive Relationships With Children, Young People And Adults4032 Words à |à 17 PagesExplain why effective communication is important in developing positive relationships with children, young people and adults. Communication is extremely important in the workplace as it is essential that you develop good communications with everyone. This will then ensure that you develop a strong positive relationship, work well together and be able to share and gain information with each other. This will mean you can all work together to meet the needs of the children, young people and adults inRead MoreTda3.11.1 Explain Why Effective Communication Is Important in Developing Positive Relationships with Children, Young People and Adults643 Words à |à 3 Pagesprinciples of developing positive relationships with children, young people and adults 1. Explain why effective communication is important in developing positive relationships with children, young people and adults For most of us in our daily lives, there are many relationships in force, often simultaneously, as this is a natural consequence of human interaction. In a school environment, relationships are formed at many different levels - between children and their peers, between children and adultsRead More1.1, Explain Why Effective Communication Is Important in Developing Positive Relationships with Children, Young People and Adults1586 Words à |à 7 PagesUnderstand the principals of developing positive relationships with children, young people and adults. 1.1, Explain why effective communication is important in developing positive relationships with children, young people and adults. Effective communication is the most important part in developing positive relationships with children, young people and adults. Some pupils that struggle with their learning and/or have confidence issues may find thatRead More1.1 Describe why effective communication is important in developing positive relationships with children, young people and adults.3026 Words à |à 13 PagesIntroduction Communication is both dynamic and complex. In time it can be learnt, understood and eventually mastered. Why then do we expect children to be able to communicate with us correctly all of the time? Working with children requires us to build positive relationships with them quickly, but also in ways that are professional. The quality of the relationships that we have with children and young people has a huge effect on the way in which we can work with them. Positive relationships withRead MoreExplain Why Communications Is Important in Developing Positive Relationships with Children, Young People and Adults765 Words à |à 4 PagesExplain why effective communication is important in developing positive relationships with children, young people and adults Communicating effectively within the school setting is very important to enable strong relationship to build between colleagues, children and parents. COLLEAGUES: Communicating positively with colleagues is an important part in helping build a strong and trusting relationship with each other. Communicating in the right way will show colleagues that you are able to talkRead MoreMy Philosophy Of Teaching Children1236 Words à |à 5 PagesWe, as adults, have a responsibility to teach and protect children. Teaching is one of the most crucial jobs an individual can have. Not only does teaching give students material to succeed scholastically, it helps apply knowledge and skills necessary for success in life. I want to teach so I can better equip children for adult life, while allowing them to be individuals and form their own personalities. At the core of my philosophy, there are four essential themes to teaching children: EmotionalRead MoreHow Social Background Affects Relationships And The Way People Communicate1519 Words à |à 7 Pagesxplain how: Social background Professional background Cultural background Affect relationships and the way people communicate. Social- Some children grow up in socially disadvantaged areas, poor housing conditions, low income households and single parent families, this in turn may affect a childââ¬â¢s learning development and restrict communication, and how you approach a family whose child may be affected due to their social background circumstances should be aware of the manner in which you approachRead MoreChildrenââ¬â¢s Speech, Language, and Communication1750 Words à |à 7 Pages language and communication Explanation of speech, language, communication and speech, language and communication needs 1.1 Children and adults use speech, language and communication to interact with others, to help them explore the environment, to make sense of everyday experiences, access information and understand concepts, as well as organise thoughts and formulate ideas and to help them express their own feelings and to understand the feelings of others (Children and Young Peopleââ¬â¢s WorkforceRead MoreCommunication and Professional Relationships with Children, Young People and Adults1687 Words à |à 7 PagesUNIT TDA 3.1 ââ¬â COMMUNICATION AND PROFESSIONAL RELATIONSHIPS WITH CHILDREN, YOUNG PEOPLE AND ADULTS 1.1. Effective communication is important in developing positive relationships with children and young adults because it helps the child to be able to communicate effectively with other people as they grow. Children react better to clear, concise communication and this in turn will help to build better relationships between child and adult and enable trust to grow, which is one of the key elementsRead MoreEffective Communication1225 Words à |à 5 PagesEffective communication with children, young people and families Good communication is central to working with children, young people, families and carers. It helps build trust, and encourages them to seek advice and use services. It is key to establishing and maintaining relationships, and is an active process that involves listening, questioning, understanding and responding. You should always communicate with them appropriately to match the stage of development, personal circumstances, and needs
Perry Smith A Passion to Kill - 1354 Words
Serial killers have long eluded law enforcement while simultaneously grabbing the attention of the public, and now more than ever, criminal psychologists are beginning to understand what makes a serial killer. In his true-crime documentary, In Cold Blood, Truman Capote depicts the horrifying murders of four members of the Clutter family and the search to find the criminals responsible for the deaths. Eventually, two killers are caught, one being Perry Smith, a detached and emotionless man. And although his carnage of the Clutters labeled him a mass murderer, many of Perryââ¬â¢s personality traits are characteristic of a serial killer. In fact, if detectives had not caught him, Perry could have easily become a serial killer. Because the termâ⬠¦show more contentâ⬠¦Many serial killers suffer from a mental illness or incapacity of some type, and more specifically, many serial killers suffer from Psychopathic Personality Disorder, or PPD, a mental disorder that causes the ina bility to empathize with others (Forensic Science 563). It is believed that infamous serial killer, Ted Bundy, suffered from Psychopathic Personality Disorder because he ââ¬Å"â⬠¦looked upon others as objects, not people to be loved or hated, just objectsâ⬠(American Decades). People with PPD are very highly manipulative and intelligent, exceptional liars, and feel as if they are superior to everyone else and therefore disregard rules and laws. However, they do not have the capacity to feel emotional remorse even when they know their actions were wrong (Forensic Science 563), just as Perry knows he should not have killed the Clutters, but he does not feel sorry for doing it (Capote 358). Basically, a psychopathââ¬â¢s ââ¬Å"main aim [in life] is self-gratification,â⬠no matter the cost (Forensic Science 563). Serial killers suffering from Psychopathic Personality Disorder usually do not start their lives of crime with murder; they often start with small acts, such as systematic lying, animal cruelty or vandalism, as children (Forensic Science 563). Jeffrey Dahmer, a serial killer thought to have killed hundreds, collected and dissolved road kill in acid as a childShow MoreRelatedCold Blood By Truman Capote, A Cold Blooded Killer1046 Words à |à 5 Pagesthrive, a child requires support from a guardian to prosper in every aspect. A secure support system t in a childââ¬â¢s life creates healthy relationships as well as providing the child with a positive perspective and mindset. However in the lives of Perry Smith, a cold blooded killer in the novel In Cold Blood by Truman Capote, child soldiers, and the children of the street, support from the family is seldom displayed. The absence of support leads these persons to lives filled with hostility and violence;Read MoreTruman Capote : Hard Times Make Good Stories1780 Words à |à 8 Pagesmany short stories (Biography.com Editors.) My writings tend to have very dark psychological themes in my b ooks (DIScovering authors.) My writings were influenced by my dark childhood. I felt neglected. I felt connected to the people like Dick and Perry in a weird way. I could relate to how they felt even though I handled it differently. While some of my books like Breakfast at Tiffany s have some humor and happiness in them (Breakfast at Tiffany s.) I am one of the first writers to use what isRead MoreTop 1 Cause for Project Failure65023 Words à |à 261 Pagesis by far the most major cause of project failure. 18. [pic] Louis Caramucci, MM, PMP Managing Partner, Founder at Pyramis LLC Lack of buyin from various areas of the company, to include sponsors and project teams can kill any project. I would say the biggest reason why website development projects fail, large or small, is content (database format - copy - imagery) not being thought through, understood, structured and/or provided by the customer at the rightRead MoreDeveloping Management Skills404131 Words à |à 1617 PagesOrganizational Interviews 629 SKILL PRACTICE 634 Exercises for Conducting Special-Purpose Interviews 634 Evaluating the New Employee-Orientation Program 634 Performance-Appraisal Interview with Chris Jakobsen 637 Employment-Selection Interview at Smith Farley Insurance 643 Supplement C CONDUCTING MEETINGS 651 SKILL LEARNING 652 Conducting Effective Meetings: A Short Guide for Meeting Managers and Meeting Participants The Five P s of Effective Meetings 652 Suggestions for Group MembersRead MoreStephen P. Robbins Timothy A. Judge (2011) Organizational Behaviour 15th Edition New Jersey: Prentice Hall393164 Words à |à 1573 PagesAlabama, Huntsville Heather Shields, Texas Tech University Ted Shore, California State University at Long Beach Stuart Sidle, University of New Haven Bret Simmons, University of Nevada Reno Randy Sleeth, Virginia Commonwealth University William Smith, Emporia State University Kenneth Solano, Northeastern University Shane Spiller, Morehead State University Lynda St. Clair, Bryant University John B. Stark, California State University, Bakersfield Merwyn Strate, Purdue University Joo-Seng Tan, CornellRead MoreProject Mgmt296381 Words à |à 1186 PagesManaging Complex Products and Systems?â⬠Research Policy, vol. 29, no. 17 2000. Jassawalla, A. R., and H. C. Sashittal, ââ¬Å"Cultures that Support Product-Innovation Processes,â⬠Academy of Management Executive, 15 (3) 2002, pp. 42ââ¬â54. Johnson, C. L., M. Smith, and L. K. Geary, More Than My Share in All (Washington, D.C.: Smithsonian Institute Publications, 1990). Kerzner, H., In Search of Excellence in Project Management (New York: Von Nostrand Reinhold, 1997). Kerzner, H., â â¬Å"Strategic Planning for the ProjectRead MoreVarian Solution153645 Words à |à 615 Pagesor 5 fewer. Does the income eï ¬â¬ect of the fall in the price of bananas make Charlie consume more apples or fewer? More. What is the total eï ¬â¬ect of the change in the price of bananas on the demand for apples? Zero. 8.2 (0) Nevilleââ¬â¢s passion is ï ¬ ne wine. When the prices of all other goods are ï ¬ xed at current levels, Nevilleââ¬â¢s demand function for highquality claret is q = .02m âËâ 2p, where m is his income, p is the price of claret (in British pounds), and q is the number of bottles of claretRead MoreExploring Corporate Strategy - Case164366 Words à |à 658 PagesECS8C_C01.qxd 22/10/2007 11:54 Page 606 606 MINISTRY OF SOUND with no links to the local drugs gangs. He even hired a psychoanalyst to cope with the gangland threats that followed his drugs crack-down: If they say ââ¬Ëweââ¬â¢re going to kill youââ¬â¢, you know what youââ¬â¢re up against. But the threats [from Londonââ¬â¢s East End drugs gangs] are much more sinister. The word is fed back that if the business is cut off, they will follow you home, go for your family, stab you or murder you.2 ButRead MoreMarketing Management Mcq Test Bank53975 Words à |à 216 Pagespoints-of-presence E) points-of-inflection Answer: A Page Ref: 280- 281 Objective: 3 Difficulty: Moderate 23) Consumers might not consider a hand sanitizer truly a hand sanitizer unless they are gels designed to apply topically, contain alcohol that kills the germs present on the skin, and developed for use after washing hands or for those times when soap and water are not available. These service elements are considered ________. A) competitive points-of-difference B) competitive points-of-parity C)Read MoreFundamentals of Hrm263904 Words à |à 1056 Pagesdisabilities must be considered when viewing other diversity groups, such as race, ethnicity, gender, and sexual orientation. She feels strongly that diversity must be integrated into the culture of the organization worldwide. Source: Ann Pomeroy, ââ¬Å"A Passion for Diversity,â⬠HR Magazine (March 2008), pp. 48ââ¬â49. (Source: Courtesy Deborah Dagit, Merck Co., Inc.) Also, as globalization became more pronounced, increased numbers of Hispanic, Asian, and other immigrants came to the United States and
Benefits of Digital Technology-Free-Samples-Myassignmenthelp.com
Question: Discuss about the how law firms could successfully utilise Digital Technology in their Workplace to provide Benefits to their Employees and Clients. Answer: With the advent of technology, while digital tools have become an integral aspect of the life of every individual, digital innovation has also invaded the large law firms as well as different in-house legal departments. With increased online presence of lawyers as well as clients, it has become easier for the lawyers to create technology-based solutions that not only helps in driving down the client costs, but also helps in enhancing the effectiveness of legal services. Some of the law firms have been executing all its functions with the help of technology and employs the effective use of technology in a wide variety of practice areas such as litigation, intellectual property and transactional works (Bharadwaj et al. 2013). Nowadays, a person seeking legal help does not literally require to go out in search of an efficient lawyer, as he can gain access to effective legal help from reputed law firms, via his tablets and smart phones. While it has become easy for clients to get profess ional legal help as and when required, it has become even easier for the lawyers to offer comprehensive solution to legal problems via online platforms. However, despite the multiple benefits, it is nevertheless a bad news that as per research reports, half of the total employment opportunities available all over the world, is predicted to get destroyed because of the invasion of technology. With the rise of digital technology in professional domains, the chance of unemployment has also increased at a steady rate. Yet nevertheless, the benefits of the digital technology can never be undermined. In this connection, it is important to state how present research reports suggest that 88% of the companies have already provided digital tools to its employees while 90% of the organizations have exhibited their willingness to invest in technology that can ensure smooth and cost-effective operation of the business activities (Rabinovich and Katsh 2014). In order to review digital information sources, for reliability and credibility, the law firms should have strict Human Resource policies whereby a selected personnel should be entrusted with the duty of preserving digital records. It is also important to institutionalize these digital contents so as to ensure complete periodic updates of each digital content review results. Since digital information is a continually evolving field, it is important to review the latest trends by researching about the latest innovation in cloud computing, conducting survey on the rival companies to know which latest technology they are using for data management (Barrett et al. 2015). Reference List: Bharadwaj, A., El Sawy, O.A., Pavlou, P.A. and Venkatraman, N.V., 2013. Digital business strategy: toward a next generation of insights. Rabinovich-Einy, O. and Katsh, E., 2014. Digital Justice: Reshaping Boundaries in an Online Dispute Resolution Environment.IJODR,1, p.5. Hansen, H.K. and Flyverbom, M., 2015. The politics of transparency and the calibration of knowledge in the digital age.Organization,22(6), pp.872-889. Barrett, M., Davidson, E., Prabhu, J. and Vargo, S.L., 2015. Service innovation in the digital age: key contributions and future directions.MIS quarterly,39(1), pp.135-154.
Tuesday, May 5, 2020
A Report Critical evaluation of luxury brand stores
Question: Explain Critical evaluation of luxury brand stores? Compare and contrast the stores (DOS or Flagship) of Louis Vuitton Gucci. You should analyse and compare the consistency of marketing message, which the stores provide in relation to their other brand touch points. Include an analysis of the respective brands heritage and DNA and how these are communicated via the retail store. Answer: 1. Introduction: Gucci is one of the worlds prominent luxury Brands in the Fashion world. The Company was founded in the year 1921, which became renowned for its high quality Italian craftsmanship, high quality of fashion goods and innovative designs. The company manufactures and distributes, high end fashion goods including, handbags, luggage bags, fine jewellery, time pieces, shoes, fragrances, ready to wear silks and eye wear products. The Gucci products are mostly available exclusively at directly operated boutiques and with a handful of authorized department and specialty stores (Lloyd et al., 2006). Louis Vuitton is a French fashion house and the worlds largest and valuable brand of luxury goods. The company is in to manufacturing of leather goods, watches, jewellery, shoes, trunks, handbags and other accessories that are adorned with the LV monogram. This international fashion house sells its products via standalone outlets, high end departmental stores, and through online retailing of its products through its company website. Many of the products manufactured by this company have the signature brown Damier and monogram Canvas Material used that adds iconic value to its products. The Company has its presence in over fifty countries, with more than 460 exclusive boutiques operated worldwide (Edberg, 2010). 2. Brand Overview: A Brand is a graphical identity of image of a company that represents the company and helps build emotional connectivity with the Target Audiences and customers of the company. It is a symbol of collection of experiences, associations and trust of the stakeholders with a company. The Brand image of a company can be further strengthened through visual representation and efficient brand communication by the company (Atwal Williams, 2009). (a) Brand Positioning and Perceptual Mapping:The Brand Positioning for both the brands Gucci as well as Louis Vuitton has always been close to differentiation by positioning the brands as sophisticated, innovative high quality and elite brands. The strategic orientation of this positioning for both these brands is based on utmost adherence to the desired quality and performance of the products offered by the brands (Flueckiger, 2009). The Symbolic expressive value of these brands further ads up to the high class positioning of these brands in the international markets. The concept of perpetual mapping revolves around the display of the location of these brands or products using more than two dimensions. The act of perpetual mapping through development of ad campaigns and web promotions thus pulls customers towards these brands and increases the overall brand appeal for the product and offerings by these brands (Vi Nguyen, 2004). (b) Brand Heritage and DNA:Brand Heritage has an indispensable connection with the history and DNA of organizations, that posse these brands. The Brand heritage is one of the prominent strengths of several responsible and ethical organizations, which work as a link to strengthen the emotional connection between the company and its target Audience (Fabrikant, 2002). The Brand Louis Vuitton is accordingly a French brand, who DNA may be traces down to the country France in the European region. The Several Art forms used by this brand in its designs are observed to have a deeper connection with the French culture. The Brand heritage of Gucci may be accordingly traced down to the Italian culture and its contemporary traditional designs (McKnight, 1987). (c) Brand Identity:The Brand identity is a way in which an organization wants its target Audience to perceive its brand name, logo, communication style and other visual elements associated with the brand (Tungate, 2009). The luxury brands Gucci and Louis Vuitton have indeed developed and extended their respective brand identities through iconic yet innovative luxury products that have attracted huge reputation and popularity to these brands. The inscribed G monogram for the Italian brand Gucci, is explicit representation of luxury and glamour that is recognized globally (Appendix 1.2). The Brand Louis Vuitton also inscribes the letters LV on few of its signature products that displays a potent symbol of modern luxury (Appendix 1.1). The exclusive boutiques by Gucci as well as Louis Vuitton, and the established distribution networks limited only to high end stores, further enhances the Brand identity of these luxury brands (Luxury Daily, 2013). 3. Brand Communication and Message/ Brand Touch points: Directly owned Stores or Flagship stores for Gucci are about 280 stores across the globe, mostly in the developed and developing markets in the world. These stores are directly operated by the company and houses exclusive Gucci products and offerings. Gucci was awarded the 38th most valuable brand in the world by Forbes in the year 2013. The company enjoys high brand equity throughout the world and has helped the society in with standing several economic down turns (Kalfopoulos, 2012). The Brand Message of the company Gucci has always been closely associated with sex appeal (Secara, 2012). Attracting the target Audience through its vibrant and controversial visuals as a Brand Messages has always been a part of the Communications and advertising promotions of the Brand Gucci. The company has experimented using floral patterns in its mens spring collection of the year 2014, which was a grand success (Cognizant 20-20 Insights, 2012). The Company had participated in several fashion shows to reach out to its target customers and convey its brand message (Refer to Appendix 2.2). Exclusivity is the prominent message that this brand has conveyed from time to time in all of its advertising campaigns. Many of the advertising campaigns, especially the print ads reflect a sexy and vibrant image of female characters. The same is also displayed undoubtedly thorough participation in the numerous fashion shows across the European region. Gucci has also attracted a lot of attention from the elite target audience through several controversial advertisings and promotion. The Promotion of the perfume Opium by using the naked image of celebrity Sophie Dahl, was one of the most controversial promotions of this brand. Gucci even had an extreme print advertisement in Vogue that created controversy due to the inscribed G in the public hair of a womans image (Luxury Daily, 2013). These actions and brand touch points helped gain better media coverage for the company that boosted brand aw areness of Gucci.The Brand Louis Vuitton has more than 500 stores around the world and is one of the largest luxury brands in terms of total Revenues and sales attracted by its parent company. The company however, is working on a strategy to limit its new store openings, and in turn focus on preserving its exclusive image (Palmitessa, 2012). The company had successfully managed to present its print campaigns to the Audience through a new mobile application (Refer to Appendix 3.1). The Brand Louis Vuitton maintains its effluent brand touch points by neither having any discount nor any duty free stores across the globe (Jones, 2014). The company in addition to its flag ship stores sells its exclusive products through its online shopping platform, Louisvuitton.com that can be accessed from any part of the world (Cognizant 20-20 Insights, 2012). Its newest mobile application Amble, allows all the users of this application to follow their favorite celebrities favorite city experiences an d has several features of creating ones own videos and notes with those celebrities (Clow et al., 2010). The Brand Louis Vuitton has always preferred celebrity advertisement and endorsement of its newly arrived products thorough celebrities (Refer to Appendix 2.1). Thus, the logo of this brand, the visual identity of the style displayed by its products and the exclusive monogram canvas of LV on its products all protects and strengthens Louis Vuittons Brand Identity and sails it effectively conveying a Heritage Brand Message. 4. Critical Comparison of Gucci and Louis Vuitton Companies: Gucci has built a very strong image in the Fashion market, like its competitor Brand Louis Vuitton. The Brand Gucci has always tried to market its brand in innovative ways. The Advertisements of this company, like a girl performing martial arts, gives a clear message of the comfort level of the fabric that this brand offers. The Brand Louis Vuitton on the other hand, prefers to highlight eminent personalities and celebrities while advertising and endorsements. The use of Artistic symbols in the product designs of the Brand Louis Vuitton are widely spotted as compared to the traditional designs of the Brand Gucci. The Brand Gucci has shown a higher degree of corporate social responsibility over the Brand Louis Vuitton for its partnership with the UNICEF since the year 2005. The Brand Gucci makes a generous donation every year to UNICEF, by offering a fixed percentage of revenues generated by the directly owned flagship stores of the company (Bengtsen, 2007). The products and offerings by the brand Louis Vuitton are more influence with artistic patterns and graffiti. The company has always strived to collaborate with several renowned artists to reflect various art forms on their products designs and offerings. Takashi Murakami, the artist who created the much copied cherry blossom print for the Brand, is an example of how the Brand is highly reflects the innovative art forms by renowned artist across the world, from time to time basis. 5. Recommendations: 1. Remaining Consistent and Authentic in terms of the range of products and offerings to the elite target segment is the primary recommendation for the Brands Louis Vuitton and Gucci. 2. These Brands may look at constantly updating and modifying the designs of their luxury offerings to suit the tastes and preferences of the modern consumer at a global level. The Luxury brands have to more often server as the cultural references points towards the innovations and changes in the global lifestyle habits of the respective target consumers (Okonkwo, 2009). 3. The Brands can also think of innovative communication channels for connecting well with their Target consumer and keeping these high-end target audiences, loyal to their respective brands. Maintaining an updated global customer database and sending them cards and goodies on special occasions like Anniversaries and Birthdays would strengthening the customer relationship with these brands. 4. These Luxury brands Gucci may follow Louis Vuittons innovative offering idea of providing customized offerings to its customers. Many of the products offered by Louis Vuitton are made to order, beaming in exotic skins that create invitation spaces in their exclusive brand stores (Palmitessa, 2012). 5. Maintaining enhanced personal relationships with the customers through Social media networks is a technology enabled strategy that has become the need of the hour for all the premium brands (Kim Ko, 2010). Also a lot of demographic information of the prominent customers using these luxury brands may be extracted through social media. This information may be further used to track the tastes and preferences of the luxury goods users, to provide vital inputs for research and developmental activities in terms of manufacturing innovative product offerings. 6. Conclusion The both the luxury brands Gucci and Louis Vuitton have adopted a brand strategy of addressing the niche elite segment in different manners. The various aspects of Brand communication and messages delivered to the target audience though differing to a high extent, both these brands have been successful in managing the cut throat competition in the luxury products segment across the international markets. It is now imperative for both these brands to extend its retail horizon beyond the brick and mortar stores to virtual stores maintaining the desired brand heritage and brand exclusivity and creativity of these luxury brands. References Atwal, G., Williams, A., 2009, Luxury Brand Marketing -The Experience Is Everything, Brand Management, Vol. 16, 338-346. Bengtsen Peter, 2007, Branding of Brand Hacking, MA dissertation, Department of Arts and cultural sciences, Lund University. Camps Samuel and Jones Mayuko, 2014, The Art of Luxury Branding, ADMAP. Clow Kenneth and Baack Donald, 2010, Integrated Advertising, promotion, and marketing communications, fourth Edition, London: Prentice Hall. Fabrikant Geraldine, 2002, The media business: Advertising, Guccis current Campaign: recovering its elite image, the New York Times.
Monday, April 13, 2020
Killing the Innocence in War, Justified or Murder
Abstract The debate surrounding the justification of deaths of innocent people caused by warring soldiers during war is a complicated issue to deal with. For fear of being attacked by disguised enemies, soldiers have ended up killing innocent civilians including older men, women, and children. While some people have argued that this may be acceptable, others think otherwise.Advertising We will write a custom essay sample on Killing the Innocence in War, Justified or Murder? specifically for you for only $16.05 $11/page Learn More To a large extent, this is linked to the belief that human beings are mostly reasonable. Generally, killing of civilians during war time is regarded as a serious offence that should be dealt with carefully if the innocent have to receive protection. On the other hand, however, it is possible for warring soldiers to find themselves in difficult situations requiring them to act fast to protect themselves from attackers unknown to them. This is especially true whenever a soldier is fighting on the enemyââ¬â¢s soil. While it is ordinarily believed that most civilians especially women and children are the innocent ones, there are instances where they have been used by soldiers to ferry dangerous weapons to be used against the opponents. This has led to situations where a soldier ignores the fact a civilian may be innocent and goes ahead to kill in self defense. This is based on the fact that it may be difficult to determine the innocence of the civilian. To be on the safe side, soldiers generally regard every person as a potential threat. Introduction The appeal to what would cause outrage in the general sentiments of humanity is a common way to think about the elements of normal moral perception of which each person is thought to be capable. Certain things are thought to be so heinous that any person would be outraged when perceiving them. The killing of civilians during war time is one of the commonly cite d examples of this kind of monstrous act (May, 2005). But consider, for a moment, the conditions of war fare when one is acting in enemy territory. In some war time situations, every person, soldier or civilian, is a potential threat. If the civilians seem to be unarmed, and the soldiers are armed, then the idea of the civilians as potential threats is only partially blunted, because the soldiers often do not know which civilians are members of the enemy forces.Advertising Looking for essay on ethics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Arguments for and Against Killing the Innocent in War It is clearly an outrage against the sentiments of humanity for soldiers to kill civilian men, women, and children? Initially, it seems that the answer would be clearly yes, as was held by the American military tribunal that convicted Lieutenant Calley. The shooting of seemingly unarmed civilians, especially children, at point blank range, appea red to be morally outrageous. Virtually, all societies have had strong moral prohibitions against the taking of innocent life (McMahan, 2009). The standard morally acceptable bases for justified killings, whether in self defense or in defense of others, can not be seen to justify killing those who do not have the capacity to harm or kill a well armed, typically male, adult soldier. Ordinarily, soldiers are trained to kill. When soldiers follow their training, and kill, it is not as much of an outrage as it would be for a non soldier to engage in such killing. But when a soldier or non soldier kills an innocent person, especially a child, this is considered to be enough of an outrage to our civilized instincts to think that it should be heavily sanctioned so as to prevent future acts of this sort at almost any cost (Buhk, 2012). In My Lai massacre, it is uncontested that Lieutenant Calley and his men killed more than 100 unarmed civilian men, women, and children. However, as one read s through the various court opinions in the case, there is quite a lot of disagreement of how best to characterize these killings. As pointed out earlier, the military tribunal found Calley guilty of war crimes, and the Court of Military Review upheld the conviction. But the first civilian court to consider the case took a very different position. Here is how the U.S. District Court characterized some of the facts: The petitioner was 25 years of age and had been an enlisted man for approximately 14 years. The petitionerââ¬â¢s first assignment in Vietnam was at Doc Pho. This was the first indoctrination about the character of the potential enemy. He was told that women were as dangerous as men, and that children were even more dangerous because they were unsuspected. He was also informed that women were frequently better shots than the men and that the children were used to plant mines and booby traps. During Calleyââ¬â¢s earlier limited missions, the unit was continually subje ct to fire from unknown and unseen individuals.Advertising We will write a custom essay sample on Killing the Innocence in War, Justified or Murder? specifically for you for only $16.05 $11/page Learn More A number of men in the company had been killed or wounded and prior to the operation at My Lai, they had never seen the persons responsible for the death or injuries of their buddies. Consequently, the formed the opinion that civilians were in part responsible. When Calley was supposedly to go to My Lai and kill everyone there, his background assumption seems to have been that all the people in the village, including men, women, and children, were enemies and potential threats. The U.S. District Court, therefore, granted Calleyââ¬â¢s petition for habeas corpus relief in part because of how it understood the facts. On the other hand, the U.S. Court of Appeals for the Fifth Circuit reversed the U.S. District, also at least in part because of its very different construal of the factual record. In reversing the U.S. District Court, the Circuit Court of Appeals seemed to see the My Lai incident as nothing other than a slaughter of unarmed, unresisting old men, women, and children. What complicated the picture in My Lai was that the distinction between civilian and combatant had become blurred, with even fairly small children being used to transport weapons. So while there may be strong sentiments against the killing of civilians, especially children, there was a possible defense in the case of My Lai that might have been an exception to the moral judgment about what was normally acceptable or appropriate behavior. For there was reason, according to the US District Court, to believe that some civilians, and even some children, could be trying to inflict injury or death on the American soldiers in this Vietnamese hamlet.Advertising Looking for essay on ethics? Let's see if we can help you! Get your first paper with 15% OFF Learn More At Calleyââ¬â¢s military trial, and also in the US Circuit Court of Appeals, such reasons were indeed considered and rejected, after much discussion and debate. However, the US District Court seemed to believe that some of the civilians who were killed might have been thought to be threats to the soldiers in Lieutenant Calleyââ¬â¢s unit. In retrospect, it seems that the District Court opinion was seriously flawed. For even if Calley had feared that the civilians in the My Lai hamlet might be enemy soldiers in disguise, they gave no indication that they were armed or that they were posing an immediate threat to Calley and his men. According to McMahan (2009), the moralized notion of a combatant as anyone who poses a threat in war is different from the legal notion. In law, combatant status is accorded to persons who satisfy certain criteria, such as disguising themselves visibly at a distance by some conventional sign, carrying their arms openly, subordinating themselves to a h ierarchy of authority and command, and obeying the laws of war. Failure to satisfy such criteria can result in the forfeiture of combatant status under the law. While combatants in this legal sense are all presumed to pose a threat, not all of those who pose a threat in war are combatants in this sense. While all those who pose a threat in war are combatants in the moral sense, a major problem in war theory is that there are many people who pose a threat in war who would not be considered combatants by anyone (McMahan, 2009). In partial defense of the District Court, I would point out that we do not always require soldiers to prove that enemy soldiers pose an immediate threat before it is considered justifiable to kill them. It may be too late by the time it discovered that suspected enemy soldiers are concealing not only their identities but also their weapons. The point here is not to argue that Calley should have been relieved of responsibility, but only to indicate that even in this seemingly clear case, two courts came to different conclusions about how to regard the My Lai massacre based on how they reconstructed the threat faced by Calley and his men in Vietnam. This discussion does not call into question the normal sentiment that innocent life should be preserved. Rather, what is uncertain is the very judgment that a certain adult or even a child is to be seen as an innocent person. And yet it is this judgment, really a matter of moral perception, which is crucial to the determination of whether it was indeed an outrage for Lieutenant Calleyââ¬â¢s unit to kill civilians in the hamlet of My Lai in Vietnam. Defenses against Killing In the US tort law, one way to make sense of whether one is liable for a given harm that he or she did not intend to cause is to ask whether one violated a duty of care owed to the person armed (May, 2005). To ascertain if one had such a duty, one looks, among other things, at what the burden would have been to the agent if he or she had conformed to the duty. If the crucial issue before us concerns the possible culpable ignorance or moral negligence of soldiers, then the tort analysis of duty and negligence becomes relevant. What makes many battlefield situations so tragic is that the cost of acting with due care toward civilians is often that the soldiers risk death to themselves. In non battlefield situations, one is hardly ever faced with imminent death if he or she exercises due care towards others in his or her life. It is for this reason that the superior orders defense shows up most commonly in the battlefield situations, and not very often off the battlefield. It may be helpful to think of conspiracy as a model of most types of shared or collective responsibility. If Susan, Smith, and Alex recruit Peter to drive a gateway car in a bank robbery scheme cooked up by Susan, then it makes sense to think of all four as collectively responsible for the resulting bank robbery. This is especially appa rent if Peter is paid well for his contribution and understands perfectly, how her contribution to this joint venture will aid in its successful completion. The driver, Peter, is a cog in a machine like enterprise that will make the robbery possible in ways that would not be true if any of the four people involved were acting on their own or in only a loosely connected manner. For this reason, they are collectively responsible for the results of their joint undertaking. Their individual responsibility will depend on the role that each plays in the joint venture. Suppose that while Peter is driving away from the scene of the crime pedestrian steps off a curb in the path of the gangââ¬â¢s fleeing car. Peter, generally a compassionate person begins to apply the brake, but Susan, the insensitive ring leader puts a gun to Peterââ¬â¢s head and urges him to drive on to avoid being court. Should Peter be held responsible for the injuries of the pedestrian as well as for the robbery? O n the assumption that one held a gun to Peterââ¬â¢s head to get him to join the conspiracy in the first place, Peter seems to be in a different moral position with respect to the pedestrianââ¬â¢s injuries than with respect to the robbery itself. Certainly, Peter appeared to have a choice of whether to join the robbery conspiracy, but not much of a choice about whether to run down the pedestrian. Was it a moral choice of Peter to ignore the order given by Susan? There are many parallel cases in international law, such as when a soldier or subordinate feels that his or her life is threatened if he or she does not follow orders. The same consideration should be operative, making us reluctant to say that in such situations, there is a moral choice available to the soldier (Kurtz Turpin, 1999). In cases of collective guilt, subtleties of context are still relevant in determining how to apportion blame to the members of the group, especially concerning legal blame and guilt (Buhk, 2012). It is, however, important to place the reasonable person standard into the specific context that the actual person was faced with. In order to do this, it is often necessary to bring in some of the beliefs of the actual person in considering what a reasonable person would have done. On the other hand, battlefield situations are so abnormal that it will often be hard to merely drop a reasonable person into a situation without taking into account how the actual person in question reacted to the situation. On several occasions, war crime tribunals have had to decide what price is too high to pay in order to expect people to reasonably exercise due care not to injure one another. In the case of Lieutenant Calley, it may be true that he and his soldiers feared for their own lives if they did not do what they thought they had been legitimately ordered to do. In Calleyââ¬â¢s case, he never claimed that someone literally had a gun to his head, forcing him to shoot the civilians. I n the same way, his concern that the seemingly innocent civilians might be enemies in disguise was not sufficient to establish the proposition that he had no other moral choice but to follow orders, for it is important to consider what sort of threat those civilians posed. If the killings of the civilians had been clearly and unambiguously wrong, then Calley would have needed a very strong showing that he had no moral choice but to do what was clearly and unambiguously wrong. An important question that to be asked is whether a reasonable person in Calleyââ¬â¢s situation would believe that these civilians posed a threat to his safety, and that of his troops. If so, then perhaps even moral choice was restricted in this situation. Conclusion Much philosophical discussion about political violence is taken up with argument about whether and to what extent acts of violence can be justified as a means to good ends. According to Kurtz and Turpin (1999), there are limit on what may justif iably be done in pursuit of good or worthy ends. Even though many actions can be justified by their beneficial consequences, some actions are simply wrong in themselves. Some people typically take the view that, other than in circumstances of war, the only acceptable justification for violence is that of self defense or defense of others from wrongful attack. Persons have moral rights not to be wrongfully injured or killed, and consequently, they have rights to defend themselves against wrongful physical attacks. It is also sometimes argued that to violently attack someone who is not engaged in or threatening violence is a kin to punishing an innocent person. Conversely, one who engages in wrongful violence against another may be said to have relinquished his or her normal rights to be attacked. We can only be justified in using as much violence against an attacker, however, as is required to defend ourselves. From the arguments presented in this paper, it is apparent that one of th e tests of whether an act of the defendant violates the requirement by law is if the act shocks the conscience of humanity. In most cases, there is an overlap of the law and morality indicating the relevance of moral matters to questions of whether a crime was committed wrongfully or not. It is, therefore, important for the court to exercise considerable restraint in prosecuting, convicting, and sentencing soldiers for deaths occurring during war. References Buhk, T. T. (2012). True Crime in the Civil War: Cases of Murder, Treason, Counterfeiting, Massacre, Plunder, Abuse. Mechanicsburg, PA: Stackpole Books. Kurtz, L.R. Turpin, J. E. (1999). Encyclopedia of Violence, Peace, and Conflict. Massachusetts: Academic Press. May, L. (2005). Crimes against Humanity: A Normative Account. New York: Cambridge University Press. McMahan, J. (2009). Killing in War. New York: Cambridge University Press. This essay on Killing the Innocence in War, Justified or Murder? was written and submitted by user Jasiah David to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.
Subscribe to:
Posts (Atom)